A cat mixed with a dragon... yes please! ^_^

Dragon Cat has 2 body types, one for wings and one that is wingless. There are also 2 wing types, articulated and solid.

The wing joints are set at a snug fit so the wings are able to hold poses better. If it is to snug, you can scale the wings down a little.

10-2-24 Per a request, added a 2nd version where the neck peg doesn't have as much flex and is more rigid.

7-1-25 Added a painted .3mf file that was colored by Seahanna.

General Settings : ◽️ Print-in-place. No supports needed! ◽️ 3+ perimeters (the more the stronger it will be). ◽️ Inner before outer wall. ◽️ Slow down outer wall speed. ◽️ 0.2 maximum layer height. 0.1 for best detail. ◽️ 15%+ infill. ◽️ Enable bridging. ◽️ Make sure to have good bed adhesion or use a brim! Made for FDM printing.

Please feel free to share images of your prints, I would love to see what you do with them! ^_^

All MysticSaige models are for personal use only. You may never alter, redistribute or sell my files in any way.

If you are interested in selling 3D Prints of my models, you may acquire a commercial license and other perks through my Patreon or Tribes memberships.

Happy Printing!!