Panda taking a moment to enjoy a swing - hueforge art
for this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 113.51x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #0086d6 PLA Bambu Labs Basic Cyan (10603) Transmission Distance: 8 #f55a74 PLA Bambu Labs Basic Pink (10203) Transmission Distance: 8 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #11 (0.96mm) swap to Cyan (10603) At layer #16 (1.36mm) swap to Pink (10203) At layer #19 (1.6mm) swap to Jade White (10100) for the rest.






















