Through the eyes of a friend 1 - Doggy wall art - Hueforge
The first design and what started this set.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.96mm and the Actual Thickness is 2.16mm
#000000 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 #5b6579 PLA Bambu Labs Basic Blue Grey (10602) Transmission Distance: 3 #6f5034 PLA Bambu Labs Basic Cocoa Brown (10802) Transmission Distance: 1.4 #ffffff PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5.8 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #13 (1.12mm) swap to Blue Grey (10602) At layer #16 (1.36mm) swap to Cocoa Brown (10802) At layer #19 (1.6mm) swap to Jade White (10100) for the rest.






















