- Follow us on Instagram (sektor7_studios_3d)

A COMMERCIAL LICENSE IS AVAILABLE HERE ON THANGS: https://thangs.com/designer/Sektor%207%20Studios/memberships (this included our premium models & free models)

Support us on Thangs to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere. You also find there a commercial license

- You can also join us on Patreon

MAIL STAND / POSTCARD STAND (MODULAR)

This time we would like to introduce you to our DESIGNER MAIL STAND / POSTCARD STAND in modular design.

The mail organizer comes in a timeless and modern design and can be printed without Fuzzy Skin and with Fuzzy Skin. Setting the fuzzy skin creates a concrete look. In the pictures we printed with Fuzzy Skin. Fuzzy Skin Settings see below.

You can scale the model along the Z-axis and thus vary its depth.

MORE OFFICE ESSENTIALS YOU CAN FIND HERE https://than.gs/c/133547

3MF-FILE ATTACHED WITH ALL THE SETTINGS!

RECOMMENDED PRINT SETTINGS:

• Filament: Bambulab PLA Matte grey, white (used in our makes)
• Infill: 10% Gyroid or Grid
• Layer Height: 0.2mm
• Walls: 2
• Nozzle Size: 0.4mm
• Support Structure: none needed
• Brim: None needed, but when you have adhesion problems than activate the brim

REALISTIC SURFACE SETTING (OUTTER CONTOUR) Here’s a proven setup (Bambu Studio):

• Fuzzy Skin: Outter Contour
• Fuzzy skin point distance: 0.50 mm
• Fuzzy skin thickness: 0.2 mm

Support us on Thangs to access exclusive content and be the first to see our new projects. Your support enables us to keep creating innovative and practical designs for makers everywhere. You also find there a commercial license

You can also join us on Patreon: https://www.patreon.com/c/sektor7_studios

Greetings

Leon from Sektor 7 Studios