print the gcodes for an optimized print path ensuring the best results

gcodes print on any printer with at least 250x250mm build volume

how to print the gcodes:

• extract the SD card from the printer
• insert the SD card in a computer using an SD card reader
• copy the gcodes on the SD card insert the SD card back in the printer
• send the gcodes from the printer interface

website: https://riverfamily.art/

made with Stepan: https://drunks.st/

Orca Slicer / Bambu Studio settings:

global:

layer height: 0.24mm line width walls: 0.6mm wall generator: Arachne order of walls: outer/inner wall loops: 2 top shell layers: 0 bottom shell layers: 0 infill density: 0% infill/wall overlap: 100% onda_1:

object flow ratio: 1.2 onda_2:

infill density: 60% infill pattern: Rectilinear infill direction: 0 onda_3:

infill density: 60% infill pattern: Grid infill direction: 45