Introducing my Horse & Unicorn design!! . I had a lot of fun designing this one. Check you this quick Demo Video to see how it assembles and poses! . Multicolor 3MF included (Compatible with PrusaSlicer, Bambu Studio, and Orca based slicers)!
. PLEASE READ: All MatMire Makes Designs are protected under Copyright Law. Your purchase gives you the right to download and print the design for your personal use. You do NOT have permission to resell or redistribute those digital files in ANY way, including altered or "remixed" versions. Prints of the design cannot be sold without authorization. . To sell PRINTS of my designs, you must obtain authorization by joining the "Merchant" Tier of either my Patreon or MMF Tribe. Membership also includes Exclusive Designs, Bonus Files, and Discounts on past files! . If you like this design, please checkout my Socials and give a follow. More designs are coming soon! . Visit my Amazon Storefront for links to the Filaments & Equipment I used. . . PRINTING DETAILS

• Body: Print in place
• Heads (Regular and Unicorn): Snap-fit to Neck using Connector Head. There is a small custom brim around the head to help with adhesion. Remove and discard it after printing
• Unicorn Horn: Insert into Unicorn Head. I recommend gluing it in to secure it. Print separately in a different color, if desired.
• Neck: Snap-fit to Body using Connector Neck. There is a small custom brim around the neck to help with adhesion. Remove and discard it after printing
• Tail: Snap-fit to Body
• Legs Front and Rear Lf & Rt: Snap-fit to Body using Connector Legs
• Connector Head (x1): Use to connect the heads to the neck.
• Connector Neck (x1): Use to connect the neck to the body.
• Connector Legs (x4): Use to connect the Legs and Arms to the body.
• “AllParts” STLs: All parts pre-arranged in one file.
• Multicolor 3MFs: (Compatible with PrusaSlicer, Bambu Studio, Orca based slicers)
• Tool_ConnectorHelper: Simple tool to aid in inserting connector pins (see video)
• No supports
• 10%-15% Infill (I recommend Gyroid, Crosshatch or 3D Honeycomb)
• 3 Walls. (Assuming 0.4mm nozzle. Adjust wall count to account for alternate nozzle sizes)

This should generally scale down to about 65% with full articulation, on a well calibrated printer. Your mileage may vary.

Check out this assembly Demo Video!

*This model was designed for FDM printing. It was not designed for Resin printing, and I cannot guarantee good/functional results. Resin print at your own risk.

Attention: Not suitable for unsupervised play by small children or pets, as small parts can pose a choking hazard if broken off due to rough play. Not recommended for children under 3.