Model is a remix of another persons work. It was modified to be printed with TPU & to help with noise dampening. If original model is printed in TPU the buttons will fall off. This design makes the button stay in place and work when printed with TPU.

This model was based on the  buttons by   "R_mix"   a printables.com user and is licensed under Creative - Commons - Attribution - non commercial - Share Alike

Settings for the print can be found in the 3mf file. Adjust to your FDM printer and filament type. This model can be printed with TPU, PLA, PLA + and other similar filament types.

More tips: Printer: FDM Rafts: Doesn't Matter Supports: Yes (no supports needed for meshes) Infill: varies Filament material: PLA (and others, adjust settings in the slicer accordingly)

Hints: To avoid having support marks on the finished part, consider more advanced settings or use of PETG as the support interface.

Alternatively split the model into to 2 and flip the bottom half before printing. Note that this option will require joining split parts after printing.

ABOUT US:

If you like our work please support us at Patreons (commercial license of our own work available on that patreons):

https://www.patreon.com/cw/uctdesigns

Shop physical items and 3D print files on Etsy:

https://uctengravingndesigns.etsy.com

Buy our 3D print files on Prusa Printables:

https://www.printables.com/@Uctdesign_4015995

Buy our 3D print files on Cult3D:

https://cults3d.com/@UCTEngravingandDesigns

Buy our 3D print files on Thangs:

https://thangs.com/designer/UCT%20designs%20%26%20engrav

Like and share our videos on Tiktok:

www.tiktok.com/@ucantony

Like and share our videos Facebook:

https://www.facebook.com/share/1B9N99xFMd/