This model is part of the series of pendant lamps with diffusers that we designed, which were very successful in Lunfardo’s lighting catalog. The design was created for home décor, and we used our RippleMesh texture along with a distinctive pattern.

What's included • The Mona Pendant Lamp with our signature RippleMesh texture, in two sizes • A step-by-step instruction file to help you replicate the result shown in the photos

Model dimensions Based on how the model is positioned on the print bed: • MONA 216: X: 216.21 / Y: 216.21 / Z: 121.20 • MONA 289: X: 289.64 / Y: 289.64 / Z: 136.20

Recommended slicers • Bambu Studio or PrusaSlicer

What you'll need to print • 0.4 mm or 0.8 mm nozzle • PLA or PETG

What you'll need to assemble • E27 screw socket with two nuts — see photos for reference • We recommend watching the assembly video included in this listing

Safety note • If you’re using PLA, the bulb must be a low-consumption LED. We also recommend this type of bulb if you’re using PETG • Always turn off the power before any installation

Related products Ara | Fiore | Lola | Ofelia | Seamless | Betty | Collection