The SIMONE vase has a classic shape with a contemporary twist. The spiral lines give the design a flowing, elegant look. The full, rounded form and narrow neck give the vase a timeless appearance. This vase can be 3D printed as a normal vase or in vase mode for a quicker print.

Place this vase on your sideboard or side table where the swirling lines come into their own. The narrow opening is ideal for a few eucalyptus branches or dried oats. Even without filling, the SIMONE vase is a refined addition to your interior.

Dimensions: D10.8 x H20 cm Resizable: yes, in your slicer 3D Model Type: shelled body and solid body (vase mode) Printing technique: FDM / FFF File type: STL Recommended materials: PLA, PETG, ABS, ASA Print difficulty: easy

Happy printing!

Recommended nozzle diameter and print settings Normal mode Nozzle diameter: 0.4mm, 0.6mm, or larger Bottom and top layers: 4 Infill: 5% Perimeters: 2 Perimeter speed range: 25-45 mm/s Layer height range: 0.25 mm-0.4 mm Extrusion width / wall thickness range: default

Vase mode Nozzle diameter: 0.8mm or larger Bottom and top layers: 4 Infill: 0 Perimeters: 1 (vase mode enabled) Perimeter speed range: 25-45 mm/s Layer height range: 0.25 mm-0.4 mm Extrusion width / wall thickness range: default Watertight: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height (0.1-0.15mm) and slower print speed (25-30mm/s) for improved layer adhesion.

License info: PERSONAL USE ONLY. 3D printed objects of this 3D model may not be sold or used commercially in any way without an active commercial license. Thank you for your understanding.

Each model takes hours of designing, testing, and refining to get right. If you'd like to 3D print and sell this design commercially, or simply want to support my work so I can keep creating and sharing free designs, please consider joining my Patreon or Thangs Membership.

Thank you for respecting the time and effort that goes into each creation.