Maple Leaves Bookmarks

16 downloads · 6 months ago · - A minimal maple leaf pattern designed to bring seasonal warmth to your pages. - No AMS/MMU require

This model is restricted by licensing terms.

View license.

A minimal maple leaf pattern designed to bring seasonal warmth to your pages.
No AMS/MMU required, only one color change.
Print Settings:
- Layer height: 0.08 mm with a base layer of 0.16 mm
- Infill: 100%
Color Changes:
- Start with White (Esun PLA Matte Milky White)
- At layer 7 (0.64 mm), swap to Orange (Esun PLA Matte Orange)
Notes:
- The minimal version is single-color and can be printed alongside the multicolor bookmark in the same build plate.
- Optional: enable ironing for a smoother top surface
- A 3MF print profile is included for AMS
- Manual printing requires converting color changes to pauses or using the STL
- Do not simplify the model (ignore floating regions warning)
- Scale only in X and Y
- Split objects manually by right-click menu
- Use a lighter or a heat gun to remove stringing
Want to sell prints? Check our profile for a commercial license.