Just in time for the holidays! Print yourself a Christmas tree magnet bottle opener or print one for your family and friends! Magnets are printed inside the part so there is no risk of them falling off or getting lost.

As with all of my models, this print requires no AMS and no glue for assembly. Included in the download is individual .stl files for each color as well as a .3mf file for BambuLab users. The pieces are press fit together after printing!

Colors used: Basic PLA: Red, Green, Blue, Yellow, Cocoa Brown, Purple

This piece was printed with... 0.4mm nozzle 0.2mm step height Default PLA settings

IMPORTANT NOTE

1. Insert a pause at the start of layer 17 for the GREEN part to insert the 3 magnets (if desired). Make sure they are firmly pushed all the way in the magnet holes and then resume the print.
2. Supports should be used for the bottle opener area. See image for settings. Make sure to check the "Remove Small Overhangs" and "On Build Plate Only" in the support.

Supplemental Materials Magnets: https://www.amazon.com/dp/B09WRF51KY?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Bottle Opener: https://www.amazon.com/dp/B0995GZ3VG?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

I have personally printed each and every one of my designs, but if there is an issue, please reach me at OddsAndOpeners@gmail.com