Mouth Cage Face Mask by Perihelion Prints

Can be worn by itself or as a cover for a disposable face mask. Suitable as a standalone accessory or to add flair to a masked cosplay outfit.

Scaled to fit most adult heads, but you may want to do a test print to confirm fit, and scale accordingly. You may also want to put a piece of form on the nose section, or it might pinch your nose a bit.

For attachment to your head, there are many options. If wearing on top of a disposable face mask, use its ear straps and fit them through the slots on the sides of the cage mask. Alternatively, you can hot glue some ear or head straps on the sides.

======

"Crossbow Lady" used in demo render (https://skfb.ly/oLGSN) by MoonCat is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Face Masks" used in demo render (https://skfb.ly/6ULKz) by ZeKa Arts is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Indian Office Woman" used in demo render (https://skfb.ly/oLUUo) by Nodeaxis Interactive is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Pink irregular waisted halter dress" used in demo render (https://skfb.ly/oJr7M) by Style3D CG is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Pocolov Hair 06" used in demo render (https://skfb.ly/6U9XS) by pocolov is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

======

0.20mm layer height recommended.

Organic supports recommended. You can experiment with other support types if you want to cut down on print time and filament usage, but organic supports will come off the easiest and should lead to the best results.

PLA/PETG recommended.

Filament Usage (estimated): 56g

Printing Time (estimated): 5h15m

^ Estimates based off slicing for Prusa MK3.9. Your mileage may vary.