Set of 4 Half Masquerade Masks by Perihelion Prints.

Ready to print and wear or display.

Includes traditional masquerade mask, a beaked "raven" mask, a larger "eagle" mask, and a rounded mask.

Should fit most adult heads.

For attachment to head, use elastic cord or ribbon. Hot glue should work. For fitting, place the mask on your face, lining it up with your nose. Measure how much ribbon you'll need to go around your head, then add a bit more and cut two equal halves. Glue one to each side of the mask, and use the leftover length to tie both pieces into a knot or bow behind or head. Or you can edit the file to come up with your own solution.

Sculpted in Blender. STL and .blend files included. Dimensions in millimetres.

======

"Blue dress" used in demo render (https://skfb.ly/oyFJB) by Pixel Swan is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Lady with corset dress" used in demo render (https://skfb.ly/ozZpV) by ustoopia is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Вечернее_Красильникова Соня_2хтк" used in demo render (https://skfb.ly/oCPVp) by sonechka is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"Chinese Dragon Fan" used in demo render (https://skfb.ly/onFLo) by Mrs. Chief is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

"комбинезонКрасильникова Соняхтк2" used in demo render (https://skfb.ly/oCQ6H) by sonechka is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).

====== 0.20mm layer height recommended.

Use supports where appropriate - organic supports recommended. Brim also recommended.

Tested and works well with PLA with 15% infill. Glass Fiber PETG also recommended.

Filament Usage (estimated):

• Half Mask: 40g
• Raven Mask: 42g
• Eagle Mask: 56g
• Rounded Mask: 30g

Printing Time (estimated):

• Half Mask: 2h45m
• Raven Mask: 3h
• Eagle Mask: 4h
• Rounded Mask: 2hr

^ Estimates based off slicing for Prusa MK3.9. Your mileage may vary.