Valence - Set of 8 Blank Full-Face Masquerade Masks

Ready to print and wear or display.

Should fit most adult heads. For attachment to head, use elastic cord or ribbon. Simply fit the mask over your face, using the nose and eye holes for reference. Then mark the places where cord/ribbon should be installed. Hot glue should work.

Sculpted in Blender. STL and .blend files included. Dimensions in millimetres.

======

0.20mm layer height recommended.

Use supports where appropriate - organic supports recommended. Brim also recommended.

Tested and works well with PLA with 15% infill.