Meet a super cute addition to The Wingie Critters Collection — a Flexi Bat! 🩷

Support-free, Print-in-Place design!

You will get:

🦇 3 STL files 🦇 1 pre-painted 3MF file

Here comes the Flexi Bat along with its two keychain versions.

I’ve prepared pre-painted 3MF file in case you have any issues with painting.

⚙️Printing⚙️

Support-free design, Print-in-Place.

The Bat scaling was tested down to 60%:

• 0.16 mm Layer Height

• infill 15%, Gyroid

• 2 wall loops

• Basic PLA

For the best results, I recommend a 0.16 mm layer height.

I printed the bat at 40% scale using a 0.2 mm nozzle. You can see it in images 9 and 10.

When using softer PLA (like PolyTerra), make sure not to scale the model down too much, as the smaller joint parts may break or deform more easily.

Customize it your way! You can move, scale, or remove parts like the pupils and eye glares. Just click on the Bat model in your Slicer Software, use Split Into Parts, then Alt-click the part you’d like to tweak.

Get a Commercial License, Monthly Deals, Bonuses, and a Welcome Pack with Exclusives:

Patreon

Happy to see you and your prints on my Socials:

Instagram TikTok

😊 Happy Printing!