This is a Face Down FlatForge. This means that you print this model face down, with the first layer on the bed being a single transparent layer. If you are printing Facedown Flatforges for the first time, please be aware that this is very different to HueForge prints. You will NEED an AMS or any other MMU. Each layer swaps filaments a total of 4 times, except for the first layer of complete transparent filament.

If you are using the 3MF and my settings, you have to ensure your colours have been assigned correctly in the objects tab.

If you only have one AMS, please make sure you pause after the first layer has finished printing, and swap the transparent filament for black.

** Print Instructions:** Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 100x100mm in size

The model is 1.56mm thick.

The region from 0.92 to 1.56mm could have a Height Range Modifier to minimize print time.

Filaments Used:

• #080a0d - PLA PolyLite Black Transmission Distance: 0.3
• #ff1016 - PLA CC3D Cherry Red Transmission Distance: 6.2
• #dea81e - PLA CC3D Lemon Yellow Transmission Distance: 6.8
• #ffffff - PLA Kingroon White Transmission Distance: 5.8 This print uses 4 unique filaments

** Slicer Instructions:**

• Each colour region is represented by a separate ‘part’ in the Objects tab.
• The part is named with the filament at the end so it's easy to assign them in the slicer.
• Load up your filaments, then assign them in the Object view tab
• Since the first layer is a full layer of transparent filament, you may pause at layer 2 and swap a spool of filament and continue. This is the only swap that will work.

If you like my work and would like to support me, you can now subscribe to a Thangs membership plan!, or if you prefer, my Patreon.

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.