Hi there! I’m Towelie, your totally chill incense holder. I may look like a towel, but I’m also a responsible adult accessory now. I hold incense. I hold it real good. You just stick it in, light it up, and let the good vibes roll. I’ll be here, doing my job… unless I get a little distracted. You know, maybe I’ll get a little high. Maybe I’ll forget what I was doing. But hey, I’m trying, okay?

I’ve got my eyes on the smoke, my feet on the base, and my heart in the clouds. So if you’re lighting up something funky, I’m your guy. Just don’t ask me to do anything complicated. I’m just a towel.

3D printing settings:

Resolution: 0.16mm Infill: 18% - gyroid Support: Yes, Tree/Organic Brim: Yes, 8mm Outer Wall Speed: 65mm/s

Assembly:

• Print All Parts - Multicolor or Paint

• Attach Towelie Arms and incense holder to Towelie Body. (BE CAREFUL) Towelie's arms are very thin and easy to break as they are thin if using PLA (PETG is recommended). The holder will be fine. Insert by the holder and not the arms by pressing into mouth hole after placing small dab of glue in hole. Then add a tiny dab of glue to each place for the arm to attach to Towelie's body.

• Glue each leg into place on the Ash Catcher.

• Glue the Towelie body with arms into the Ash Catcher over the legs.