Spooky Skeleton - Articulated Fidget Skeleton - Ludo Flexy
Want more Designs like this? Become a member for more fidget Toys.
You MUST have an active membership in order to sell 3d prints of Ludo models
The Spooky Skeleton
This Fidget Skeleton is a super fun fidget toy. All the joints articulate right off the build plate. The Head, body, legs and arms all articulate.
Keychain Version This model is available with a hole cut for keychains. (Provided in the Easy Print 3mf only) Key chain
Printing This print requires a multi-color printer (unless you want to hand-paint the model). Use the included Easy Print File for the pre-colored model to make printing easier!
Print at 0.2mm layer height. Use adaptive layers to get a smoother top surface.
Filaments I Used: Black: Bambu Matte Charcoal
White: Bambu Matte Ivory White
Spooky Skeleton - Articulated Fidget Skeleton - Ludo Flexy
Ludo Sheltie - Articulated Fidget dog
Jumping jackalope - Articulated Fidget Jackalope
Chatty Cockatoo - Articulated fidget Cockatoo
Ludo Havanese -Articulated Fidget Dog
Labradoodle - Articulated Fidget Dog
Ludo Pug - Articulated fidget dog
Popsicle Clicker
Buck-Tooth Beaver - Articulated fidget beaver
Ludo Boarder Collie - Articulated Fidget Dog
Ludo Springer Spaniel - Articulated Fidget Dog
Grumpy Goose - Articulated Fidget Goose
.png&w=3840&q=75)
Ludo Chihuahua - Articulated fidget Dog
Pecky Pigeon- Articulated Fidget Pigeon
Icky Iguana - Articulated fidget Iguana
Ludo Jack Russel - Articulated Fidget Dog
Squawking Seagull - Articulated Fidget Seagull
Ludo Pomeranian - Articulated Fidget Dog
Husky - Articualted Fidget Dog
Able Alien - Articulated fidget alien
Are you printing this with brim or raft? I have been having issues with my P2S(Might be printer issue).
I didn't use a brim or raft. I would say, make sure you clean your plate with dish soap and warm water and I've seen a lot of people have luck with adding glue to the pei sheet and it helps with adhesion of small parts.
Hey @LUDO - this model looks great, but when I try to open it in PrusaSlicer, I get an error message that loading the file failed. (No other details.) I'm sure it's a problem on my end (not with the file), but would it be possible for you to add the STL files to see if that works? Thank you!!
This has been happening for me since they started only providing 3mf files. Previously I could load the 3mf but the layout would be all wrong, but I could arrange them, or I could just load the stls. Now, the 3mf file fails to load entirely. I believe this is an incompatibility introduced by Bambu Studio. I've found a workaround by using this tool (https://github.com/raistlinJ/3mf_bambu2prusa) which converts the 3mf into a format that PrusaSlicer can load.
Thanks for this - I found an online converter that does the same thing!
Same for me!
I can't get this to print correctly, even adjusting print heights and layers, the prints will not work on my Flashforge AD5X.
Hi, that is definitely frustrating so I hope I can help figure it out with you. What seems to be the issue exactly? is it just not adhering to the build plate or is there a different issue you are seeing?