This model is Kara, our new pendant lamp from the diffuser line, inspired by another design from our catalog. We printed it in Matte Slate Gray and Limestone PLA, which makes our RippleMesh texture stand out even more.

What's included • The Kara Pendant Lamp with our signature RippleMesh texture, in two sizes • A step-by-step instruction file to help you replicate the result shown in the photos

Model dimensions Based on how the model is positioned on the print bed: • Kara 216: X: 216.88 / Y: 216.88 / Z: 120.60 • Kara 295: X: 294.85 / Y: 294.84 / Z: 133.80

Recommended slicers • Bambu Studio or PrusaSlicer

What you'll need to print • 0.4 mm or 0.8 mm nozzle • PLA or PETG

What you'll need to assemble • E27 screw socket with two nuts — see photos for reference • We recommend watching the assembly video included in this listing

Safety note • If you’re using PLA, the bulb must be a low-consumption LED. We also recommend this type of bulb if you’re using PETG • Always turn off the power before any installation

Related products Ara | Lola | Fiore | Ofelia | Seamless | Betty