Ready to print 3mf file included. This model is available for free for a limited time. The petals do not physically connect to the center so you can move them around more easily.

You'll need 5 petals, and I'd recommend printing at least one of the "Petal for Fan" on build plate 1 in case you want to add the electric blower fan.

The lids can be rotated to print top side up or down.

If you're going to add the fragrance oils you should use the glass trays (or similar) linked below. Essential oils can damage PLA.

Brims are enabled by default, but you may be able to disable them if your build plate has good adhesion.

Filament used is linked in the Amazon list. You'll need roughly 2.5 kgs of filament.

Amazon shopping list: https://www.amazon.com/hz/wishlist/ls/16NVF039QLN0S?ref_=wl_share