Spooky Snail LED Tea Light Holder is here 🐌👻!

It also comes as a Figurine, Holder and a Keychain. Go check them out on my page and pick your favorite! 💕

Support-free design, ready for easy No-AMS Assembly versions for everyone!

You will get:

🐌 8 STL files 🐌 1 pre-painted 3MF file

Here comes the Ghosty Snail Tea Light Holder in partially AMS, and no AMS versions. In the partially AMS version, you only need to assemble the skull. If assembling tiny details like eyes and blush is a bit tricky, this version can makes it much easier.

I’ve prepared pre-painted 3MF file in case you have any issues with painting, plus you can view all the Snail parts together in one place.

⭕About LED Tea Light Holder⭕

• The tea light holder hole at 100% scale is about 38mm. So, scale it accordingly to your tea light LED candle.

• The Skull has some overhangs on the top. If you have printing issues, use the Skull with bridges or add minimal supports for the top.

• I do not recommend scaling it down. At 100% scale, the Skull has only 3 walls to let the light through.

• The Skull comes in two versions: one with eye holes for opaque filaments, and one without holes for translucent or slightly translucent filaments.

• Make sure you have good bed adhesion. I would recommend use outer-and-inner brims for the Skull part.

READ MORE about Printing Details and Ghosty Snail Assembly.

Get a Commercial License, Monthly Deals, Bonuses, and a Welcome Pack:

Patreon

Happy to see you and your prints on my Socials:

Instagram TikTok

😊 Happy Printing!