Here is a revision of my Pixel Pizza Slice that you can take on the go 🍕 I designed a hinged pizza box, shortened the height of the crust to better fit in the box and made the pepperoni’s bigger.

Dimensions of Pizza Slice (assembled): 3 ¼ in x 3 ¼ in x 1 in Dimensions of Pizza Box: 3 ¾ in x 1 ¼ in.

3D Printing Instructions: Basic PLA is the best for this print. I don’t recommend PLA Silk or PLA Matte filaments. It is very detailed (on the inside) and the tolerances are small. I printed several of these in these three types of filaments and Basic PLA always printed the best and had smoothest “movement” when done.

Layer Height 0.2mm Infill 10-15% Supports needed in the cavity at the end of the pizza slice and for the crust

I've included a 3mf file with the following print profile:

Print Plate #1 (Pizza Box_top): 1 color Print Plate #2 (Pizza Box_bottom): 1 color Print Plate #3 (Pizza Slice): 3 colors, supports in cavity at the end of the slice Print Plate #4 (Short Pizza Crust): 1 color, supports added

To assemble, fit the pizza crust onto the end of the pizza slice. It should be a snug fit but feel free to add a little super glue if you would like:) For the pizza box, fit the raised nubs on the lid to the corresponding divots in the bottom of the box.

Enjoy!