I had previously created a tide pod dispenser you can find here:

https://than.gs/m/1307689

Some users reported that the hooks were too tight. I redesigned hooks with looser tolerance and moved them on a removable dovetail. This will allow you to slide off the dispenser from the board and take it to where you intend to use. I have deliberately kept the tolerances of the dovetail loose to allow easy slide off/slide on but can upload a tighter tolerance version for permanent mounting If someone needs one-you could also use some CA glue for permanent mounting of the dovetail.

I also added skadis slots to the walls! Use only for hanging lightweight items with hooks such as this: https://than.gs/m/1283678 I have added paint on supports for a cleaner finish but you can modify and use slicer defaulted if you wish. Printed in polymaker Panchroma Cope as I found it to be very strong but should work with PLA tough /PETG (preferred) or ABS.