Works with Tapo c100 and Tapo c111 at least. Likely to work with other Tapo models

(6mm space between center of mount holes)

Printed with regular old PLA. Auto tree supports work fine from Orca.

I didn't want to hang the camera from the top and have it be in the way of the door opening/closing.

I didn't want to hang the camera on the inside of the door, and risk the print head hitting it.

Those were the only 2 models I could find for the ECC, so I took the attachment from one and the hanger from the other.

→ added a second lip on the top hook so it hugs the glass, and suspends itself

→ spaced it out so the camera would fit in between the print and the glass

→ changed the length so the lens would be at print head level.

There is an intended amount of gap / wiggle room, so the camera can be aimed in any direction a little bit.

You can't close the door all the way.

If you buy a smart plug for $20-$30 and plug the printer in to it, you can now remotely monitor and shut down a failed print.

Remixed from https://www.printables.com/model/1290460-tapo-c100-camera-mount-for-elegoo-cc-with-riser and https://makerworld.com/en/models/1242045-door-mount-camera-holder-for-tp-link-tapo-c100#profileId-1262758