Fanart quick render of Tony Tony Chopper from One Piece - Hueforge Art
A couple art pieces to share tonight. First up is Chopper!
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150.05x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Matte Dark Blue (11602) Transmission Distance: 1 PLA Bambu Labs Matte Ice Blue (11601) Transmission Distance: 3.5 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Dark Blue (11602) At layer #12 (1.04mm) swap to Ice Blue (11601) At layer #19 (1.6mm) swap to Jade White (10100) for the rest.






















