We designed this model as a nod to one of our classic adaptive lamps, featuring our original RippleMesh texture. The design was meant to be used either as a single piece or as a set of three in the same space.

What's included • The Larisa Lamp with our signature RippleMesh texture, in two sizes • A step-by-step instruction file to help you replicate the result shown in the photos

Model dimensions Based on how the model is positioned on the print bed: • Larisa 193: X: 209.51 / Y: 209.51 / Z: 193.2 • Larisa 331: X: 290.32 / Y: 290.32 / Z: 331.2

Recommended slicers • Bambu Studio or PrusaSlicer

What you'll need to print • 0.4 mm or 0.8 mm nozzle • PLA or PETG

What you'll need to assemble • E27 screw socket with two nuts — see photos for reference • We recommend watching the assembly video included in this listing

Safety note • If you’re using PLA, the bulb must be a low-consumption LED. We also recommend this type of bulb if you’re using PETG • Always turn off the power before any installation

Related products Carla