Three parts make a whole - Summer days walking in the meadow Art - Set of bookmarks
Week 59 - These three go together to form a larger picture.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mm
Filaments Used: PLA Bambu Labs Matte Dark Green (11501) Transmission Distance: 0.5 PLA Bambu Labs Matte Scarlet Red (11200) Transmission Distance: 2 PLA Bambu Labs Basic Gold (10401) Transmission Distance: 3.5 PLA Bambu Labs Matte Ivory White (11100) Transmission Distance: 3.5 This print uses 4 unique filaments
Swap Instructions: Start with Dark Green (11501) At layer #12 (1.04mm) swap to Scarlet Red (11200) At layer #16 (1.36mm) swap to Gold (10401) At layer #20 (1.68mm) swap to Ivory White (11100) for the rest.
























