The beauty of modern asian art - Anime girl on display - set of bookmarks
3rd bonus - anime girl
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Matte Charcoal (11101) Transmission Distance: 1.5 PLA Bambu Labs Basic Orange (10300) Transmission Distance: 5.6 PLA Bambu Labs Basic Cyan (10603) Transmission Distance: 8 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 This print uses 4 unique filaments
Swap Instructions: Start with Charcoal (11101) At layer #10 (0.88mm) swap to Orange (10300) At layer #15 (1.28mm) swap to Cyan (10603) At layer #18 (1.52mm) swap to Beige (10201) for the rest.

























Did you not use a blue grey/ dark grey instead of cyan? Colors look iffy in the print preview.