Hope everyone is having a great evening. I am sharing a couple different pieces of art tonight. This first one is of a storm (with skull formation) heading to the coastline.

I used dark blue as the 2nd color on the storm side and hark green as the 2nd color on the land side. Gives an interesting design

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Matte Dark Blue (11602) Transmission Distance: 1 (Dark Green for land Side PLA Bambu Labs Matte Ice Blue (11601) Transmission Distance: 3.5 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #6 (0.56mm) swap to Dark Blue (11602) At layer #9 (0.8mm) swap to Ice Blue (11601) At layer #15 (1.28mm) swap to Jade White (10100) for the rest.