Georgii K
Sculturissimo_3D1.6K followers
Sculturissimo_3D
Sculturissimo_3D
|
Image 1 of 3
Medusa Bust Sculpture – Elegant Mythological Decor 3d model
Sculturissimo_3D
Sculturissimo_3D
|
Image 1 of 3
Medusa Bust Sculpture – Elegant Mythological Decor 3d model
Medusa Bust Sculpture – Elegant Mythological Decor 3d model
Medusa Bust Sculpture – Elegant Mythological Decor 3d model
Medusa Bust Sculpture – Elegant Mythological Decor 3d model

Medusa Bust Sculpture – Elegant Mythological Decor

Meet the Medusa Bust Sculpture — a striking take on the legendary figure, reimagined in a moment of quiet grace. This model captures a soft, emotional expression rather than the usual fierce stare, with eyes closed and lips gently parted — like she’s frozen in a thought or dream, not just in myth. The snake hair is wildly detailed and full of movement, with each serpent twisting in its own rhythm around her serene face.

Printed in matte black PLA, it gives off a dramatic yet elegant vibe that works beautifully in modern interiors — from gothic touches to clean, minimalist rooms. Perfect as a centerpiece or bookshelf accent, it’s both a conversation piece and a contemplative artwork.

Community Makes (3)
Make by user
Printed on Elegoo Centauri Carbon,  using Elegoo PLA,  I did Calibration test for the filament, flow, temp and pressure advance,  and it paid off,  this print came out beautiful I cannot even see the layer lines.  this is a complicated piece because of all the supports (to plate only) the supports looked like the snakes and were interwoven, fortunately I increase the Top Z clearance from 0.2 to .22  to make it easier to separate without breaking anything.   hoy end 210C and bed was at 60.  In the picture I haven't even done a full cleaning so you might see a couple strands of support.
Looong but very nice print. Used bambu pla basic black
Make by user
Printed on Elegoo Centauri Carbon,  using Elegoo PLA,  I did Calibration test for the filament, flow, temp and pressure advance,  and it paid off,  this print came out beautiful I cannot even see the layer lines.  this is a complicated piece because of all the supports (to plate only) the supports looked like the snakes and were interwoven, fortunately I increase the Top Z clearance from 0.2 to .22  to make it easier to separate without breaking anything.   hoy end 210C and bed was at 60.  In the picture I haven't even done a full cleaning so you might see a couple strands of support.
Looong but very nice print. Used bambu pla basic black


Community Makes (3)
Make by user
Printed on Elegoo Centauri Carbon,  using Elegoo PLA,  I did Calibration test for the filament, flow, temp and pressure advance,  and it paid off,  this print came out beautiful I cannot even see the layer lines.  this is a complicated piece because of all the supports (to plate only) the supports looked like the snakes and were interwoven, fortunately I increase the Top Z clearance from 0.2 to .22  to make it easier to separate without breaking anything.   hoy end 210C and bed was at 60.  In the picture I haven't even done a full cleaning so you might see a couple strands of support.
Looong but very nice print. Used bambu pla basic black
Make by user
Printed on Elegoo Centauri Carbon,  using Elegoo PLA,  I did Calibration test for the filament, flow, temp and pressure advance,  and it paid off,  this print came out beautiful I cannot even see the layer lines.  this is a complicated piece because of all the supports (to plate only) the supports looked like the snakes and were interwoven, fortunately I increase the Top Z clearance from 0.2 to .22  to make it easier to separate without breaking anything.   hoy end 210C and bed was at 60.  In the picture I haven't even done a full cleaning so you might see a couple strands of support.
Looong but very nice print. Used bambu pla basic black

Discussions
Firebirdtpg
Firebirdtpg
 3d model
PrinterBambu Lab X1
Rafael V
rramerongen
Looong but very nice print. Used bambu pla basic black
Looong but very nice print. Used bambu pla basic black 3d model
 3d model
PrinterBambu Lab P1S
Print bed sizeX: 25 mm; Y: 25 mm; Z: 5 mm
MaterialPLA
Layer height0.2 mm
Infill density15 %
William C
artifex.wc
Printed on Elegoo Centauri Carbon, using Elegoo PLA, I did Calibration test for the filament, flow, temp and pressure advance, and it paid off, this print came out beautiful I cannot even see the layer lines. this is a complicated piece because of all the supports (to plate only) the supports looked like the snakes and were interwoven, fortunately I increase the Top Z clearance from 0.2 to .22 to make it easier to separate without breaking anything. hoy end 210C and bed was at 60. In the picture I haven't even done a full cleaning so you might see a couple strands of support.
Printed on Elegoo Centauri Carbon,  using Elegoo PLA,  I did Calibration test for the filament, flow, temp and pressure advance,  and it paid off,  this print came out beautiful I cannot even see the layer lines.  this is a complicated piece because of all the supports (to plate only) the supports looked like the snakes and were interwoven, fortunately I increase the Top Z clearance from 0.2 to .22  to make it easier to separate without breaking anything.   hoy end 210C and bed was at 60.  In the picture I haven't even done a full cleaning so you might see a couple strands of support. 3d model
 3d model
MaterialPLA
Layer height0.16 mm
Infill density8 %
SupportsTree
BrimNo
D
D1Bobbyg

Very beautiful work! Well done my friend!!

Albert john

Love the softer take on Medusa — the closed eyes really shift the whole mood. It feels more like a story frozen mid-thought than just a myth turned to stone bói tình yêu lgbt.

@marcmaric243443

fdsfsdfdfsdf

Georgii K
Sculturissimo_3D

Thanks for stopping by!

@marcmaric243443

sfsdhghfggdfgdfgdfgfd

Georgii K
Sculturissimo_3D

Thanks for stopping by! I'm glad you're interested in my Medusa Bust design.

@marcmaric243443
Georgii K
Sculturissimo_3D

Thanks for stopping by! If you have any thoughts or feedback on the Medusa Bust design, I'd be happy to hear them.

View all 12 discussions

Medusa Bust Sculpture – Elegant Mythological Decor

1.1K downloads · 1 year ago in  and 
Georgii K
Sculturissimo_3D1.6K followers