Add an elegant touch to your interior with this minimalist vase with a braided texture. The sophisticated pattern creates a boho look and fits perfectly with contemporary interiors. Its slim shape makes it ideal for some pampas plumes. Thanks to its subtle relief, this vase becomes a real eye-catcher on your table or windowsill even without flowers. The braided / knitted motif gives a nice depth effect to the vase, which definitely makes it stand out.

Dimensions: 9 x 20 cm Print time: 3 - 4 hours Resizable: yes, in your slicer. 3D Model Type: SOLID body (not hollow, designed for vase mode) Printing technique: FDM / FFF File type: STL

Recommended materials: PLA, PETG Recommended slicer: Prusaslicer, Cura, Bambu Studio, Orca Slicer, Creality Slicer, Simplify3D Print difficulty: easy

Recommended nozzle diameter and print settings For sturdy vase mode prints, a larger nozzle (0.8mm+) and thicker extrusion lines (1.0mm+) are recommended. This combination creates a strong, single-walled structure that compensates for the lack of multiple walls and infill.

Slicer setting: spiral vase mode / spiralize outer contours enabled Nozzle diameter: 0.8mm, 1mm, or larger Bottom layers: 8 Perimeter speed range: 15 - 30 mm/s Layer height range: 0.1 mm - 0.6 mm Extrusion width / wall thickness range: 1mm, 1.2mm or larger. Watertight: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height and lower print speed for improved layer adhesion.

License info: PERSONAL USE ONLY, unless you have a commercial license.