A little blue alien "dog" taking some time to relax with his friend - Set of bookmarks
Week 55 set 2 - Yes, he looks similar to a Disney character who might Stitch with Lilo.
For these Models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Matte Dark Blue (11602) Transmission Distance: 1 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 PLA Bambu Labs Basic Light Gray (10104) Transmission Distance: 2.8 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #9 (0.8mm) swap to Dark Blue (11602) At layer #14 (1.2mm) swap to Beige (10201) At layer #20 (1.68mm) swap to Light Gray (10104) for the rest.
























