This product is part of the diffuser series we designed, intended to be used with specific pendant lamps from the catalog, but also individually as a new lamp. We made it free so you can try out how our RippleMesh texture prints before deciding to subscribe.

• Bases to assemble your new table lamp: Collection
• Other diffusers from the series: Collection
• Which lamps you can pair it with: Ara | Lola | Ofelia | Seamless

3D printing settings It's important to follow the necessary inputs in order to print this model; otherwise, errors may occur during printing.

These settings are designed for Bambu Studio and PrusaSlicer. While they can work with other slicers, we recommend using these two to avoid potential issues.

With a 0.8mm nozzle: • Don’t rotate the model. • Set the Layer Height to 0.6 mm. • Activate Spiral Mode (vase mode). • Slow down print speeds for Overhangs and disable Bridge Perimeters. • Set 4 Bottom Layers. • Use External Perimeters/Outer Wall at 1.2 mm.

With a 0.4mm nozzle: • Don’t rotate the model. • Set the Layer Height to 0.2 mm. • Activate Spiral Mode (vase mode). • Slow down print speeds for Overhangs and disable Bridge Perimeters. • Set 12 Bottom Layers. • Use External Perimeters/Outer Wall at 1 mm.

Observations • For both 0.8mm and 0.4mm nozzles, we used a Wall Speed / Outer Wall Speed of 15 mm/s and got good results. If you want to speed things up, we recommend increasing in small increments from this value. • Ignore "non-manifold edge" error.

How to install • You need an E27 screw socket with two nuts/rings to assemble the lamps.

Download Dimensions: Difuser Z112: X: 155.90 / Y: 155.90 / Z: 112.20 Difuser Z124: X: 171.32 / Y: 171.31 / Z: 124.20