Savannah Green Savannah Gaze Series - Part 2

Savannah Green is the second instalment of our striking 4-Part Series, "Savannah Gaze", capturing the essence of the wild, with vivid splashes of colour that bring the animal’s presence to life.

To complete the series, Savannah Blue, Savannah Red, and Savannah Violet are available for download HERE

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

This print measures 325mm x 320mm. You can scale the size up or down by adjusting the X and Y axes, but do not change the height of the model (Z axis).

You may print at higher layer heights below the Min Depth of 0.32mm.

Filaments Used: PLA BambuLab Basic Green (or any dark green), Transmission Distance: not important PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Black Transmission Distance: 1.4 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 7 unique filaments

Swap Instructions: Start with Green (or any dark green) At layer #9 (0.8mm) swap to BambuLab Green At layer #12 (1.04mm) swap to Black At layer #15 (1.28mm) swap to Charcoal Black At layer #19 (1.6mm) swap to Orange At layer #20 (1.68mm) swap to Beige At layer #28 (2.32mm) swap to Jade White for the rest.

FRAMES ARE AVAILABLE SEPARATELY. SEE HERE