This modern vase design features a sleek shape with an elegant wavy relief. The flowing waves give the vase a distinctive appearance in your space. Place the vase as a statement piece on a windowsill or table to add a stylish, modern touch to your room. Thanks to its unique texture and streamlined profile, this vase is an artistic object that draws attention even without (dried) flowers.

Specifications

Dimensions: 7,8 x 20 cm Print time: 2 - 4 hours Resizable: yes, in your slicer. 3D Model type: SOLID body (not hollow inside, specifically designed for vase mode) Printing technique: FDM / FFF-only File type: STL Recommended materials: PLA, PETG Recommended slicer: Prusaslicer, Cura, Simplify3D Print difficulty: easy

Recommended nozzle diameter and print settings For sturdy vase mode prints, a larger nozzle (0.8mm+) and thicker extrusion lines (1.0mm+) are recommended. This combination creates a strong, single-walled structure that compensates for the lack of multiple walls and infill.

Slicer setting: vase mode / spiralize outer contours ENABLED Nozzle diameter: 0.8mm, 1mm, or larger Bottom layers: 8 Perimeter speed range: 15 - 30 mm/s Layer height range: 0.1 mm - 0.6 mm
Extrusion width / wall thickness range: 1mm, 1.2mm or 1.4mm+ Watertight?: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height and lower print speed for improved layer adhesion.

License info: PERSONAL USE ONLY, unless you have a commercial license.

Note: these are real photos of my test print that I made with a DSLR and a studio light (these are not renders / AI). Filament I used is SILK PLA.