The Harvest Right Wi-Fi kit is a great item, but it just hangs off the side of your freeze dryer. In order to provide some additional protection to the USB ports and cables, I wanted to create a mount to hold the Wi-Fi Adapter so it would not be accidentally bumped or pulled out easily.

It can be mounted with the adhesive if your choice (I used a command strip on mine).

I added optional magnets to the back of the mount so it could be attached to a magnetic surface. Note: It won't attach the to dryer itself due to it being stainless steel, but if you use a longer USB cable it can be attached to any magnetic surface. . Magnets can be press fit just fine, but I recommend a dab of super glue to hold them in place. The holes are designed for 6x3 mm magnets.

Example printed in ABS with 0.4 nozzle and 0.2 layer height.

This work is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit https://creativecommons.org/licenses/by-nc-sa/4.0/