This Flexi Toucan is an articulated Mostly print-in-place model that needs NO supports.

I say "mostly" because the wings, head and bill are printed separate with easy pop-in-place ball joints. Not only does this allow for more motion in the head, wings, and bill, but it also allow you to mix and match color combinations.

Included files: -Head -Body -Left wing -Right wing -Beak Bottom -Beak Top -3MF

To assemble the Beak... Start with the bottom first. Simply set one side in the divot and push the other side in place. The inset of the mouth will guide it right in. There is an inset for the Top beak too. Just repeat the process.

Also Optimized for AMS, meaning if you are using a Bambu or Prusa with multiple colors, you should easily be able to use the fill tool for coloring. I have added a 3mf as well for convenience!

Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without supports.

Please feel free to share images of your prints on this page, I would love to see 'em.

Thank you.

P.S. If you like this design, Check out my other models.

https://thangs.com/designer/flexifactory

ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.

To legally sell them, you may obtain my permission through this link: https://linktr.ee/flexifactory

3D printing settings:Easy Print. Can be scaled

-No Supports (adding supports will hinder functionality) Mostly Print-in-place (wings, head and bill, print separately and pop in) -15% infill -I always like to use 3 walls -PLA works great