We wanted to blend our beloved RippleMesh texture with solid stripes in between, shaping it into a spiral. The result? A hypnotic lamp, especially when it spins in the wind.

What's included • The Cora Pendant Lamp with our signature RippleMesh texture • A step-by-step instruction file to help you replicate the result shown in the photos

Model dimensions Based on how the model is positioned on the print bed: • Cora 218: X: 218.64 / Y: 218.62 / Z: 178.20 • Socket Cover 218: X: 124.68 / Y: 123.79 / Z: 68.55 • Cora 298: X: 297.62 / Y: 297.63 / Z: 241.20 • Socket Cover 297: X: 170.21 / Y: 169.05 / Z: 74.55

Recommended slicers • Bambu Studio or PrusaSlicer

What you'll need to print • 0.4 mm or 0.8 mm nozzle • PLA or PETG

What you'll need to assemble • E27 screw socket with two nuts — see photos for reference • We recommend watching the assembly video included in this listing

Safety note • If you’re using PLA, the bulb must be a low-consumption LED. We also recommend this type of bulb if you’re using PETG • Always turn off the power before any installation

Related products Toro Pendant Lamp | Springy Adaptive Lamp | Musho Table Lamp