Star Wars Universe Fan Art - Jedi and Sith, The dark and the light at battle - Hueforge art
another bonus. Some Star Wars fan art. And yes, I intentionally gave them High Heals to fight in.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x136.84mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.5mm and the Actual Depth is 2.6mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Blue Grey (10602) Transmission Distance: 3 PLA Bambu Labs Basic Red (10200) Transmission Distance: 4 PLA Bambu Labs Matte Latte Brown (11800) Transmission Distance: 2 PLA Bambu Labs Matte Ivory White (11100) Transmission Distance: 3.5 This print uses 5 unique filaments
Swap Instructions: Start with Black (10101) At layer #10 (0.88mm) swap to Blue Grey (10602) At layer #13 (1.12mm) swap to Red (10200) At layer #16 (1.36mm) swap to Latte Brown (11800) At layer #21 (1.76mm) swap to Ivory White (11100) for the rest.






















