The Optimistic Orangutan

This Fidget Orangutan is designed to be printed with no supports. All the joints articulate right off the build plate. Print multiple Orangutan and you can chain them together!

Printing This print requires a multi-color printer (unless you want to hand-paint the model). Use the included Easy Print File for the pre-colored model to make printing easier!

Print at 0.2mm layer height. Use adaptive layers to get a smoother top surface on the belly and face.

Keychain Version This model is available with a hole cut for keychains. (Provided in the Easy Print 3mf only) Key chain

Magnet Version This model is available with holes cut for magnets. (Provided in the Easy Print 3mf only) Add glue to magnet for best results. 5mm x 3mm Magnets

Filaments I Used: Some of these contain affiliate links

Black: Bambu Matte Charcoal

White: Bambu Matte Ivory White

Orange: Bambu Terracotta

Grey: Polymaker Matte Grey