The second of the minimalist Star Wars series - Captain Phasma! I've attached the 3MF file with all the recommended settings as well as the layer swaps already coded in. If you do not want to use the 3MF, feel free to use the STL instead!

Print Instructions Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 155.26x240mm in size You may print at higher layer heights below the Base Thickness of 0.6mm The Max allowed Thickness is 2.2mm and the Actual Thickness is 1.96mm

Filaments Used:

• PLA BambuLab Matte Dark Red Transmission Distance: 1.5
• PLA Kingroon Black Transmission Distance: 0.2
• PLA Chrominal Penumbra Gray Transmission Distance: 6.9
• PLA Kingroon Grey Transmission Distance: 2.5
• PLA Kingroon White Transmission Distance: 5.8 This print uses 5 unique filaments

Swap Instructions:

• Start with Dark Red
• At layer #8 (0.76mm) swap to Black
• At layer #14 (1.24mm) swap to Penumbra Gray
• At layer #19 (1.64mm) swap to Grey
• At layer #21 (1.8mm) swap to White for the rest.

If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!, or if you prefer, my Patreon.

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.