Join my Patreon to get this and over 30 other models this month!! patreon.com/Jambabydesigns

Forget the Stanleys....Owalas are where its at!! Our house is full of these cool water bottles, and now it is full of clicker keychain versions of Owalas, too!!

If you love my Manley the Stanley Tumbler clicky fidget, you will also adore Paula the Owala. Easy to print, and customizable to match any colors!

These fidgets make a satisfying click when fitted with a key switch, and look adorable on your keys, purse or backpack.

There is a single color STL model, and a multicolor 3MF file. Each part is no more than 4 colors for easy printing with an AMS. You can print it with or without a face, and with or without keychain holes.

Most key switches fit nice and tight. If your key switch has an outline around the center cross and does not fit in the cap, the outline can be trimmed off for a good fit. I recommend Kailh box white 3-pin key switches available on Amazon and AliExpress. They are good quality and very clicky!!

3D printing settings

0.16-0.2 layer height

3 walls

arachne walls

detect thin walls ON

concentric top layers

top shell layers 4

8% gyroid infill

NO Supports needed

only one layer on top surfaces OFF*

*This is a setting under Quality on Bambu Studio. You should leave it permanently OFF (NOT APPLIED) in order to get better top surfaces on your prints.