File link: https://makerworld.com/en/models/1165846-piranha-plant-magnet#profileId-1173136

If you would like to sell prints of this model, please subscribe to my commercial plan https://thangs.com/designer/SIR_PRINTSALOT

This Piranha plant finally completes the set of the Mario fridge magnets.

Powered by MakerWorld-Image to Keychain (https://makerworld.com/makerlab/imageToKeychain)

This design was originally made by @BenchyMaker, and later added on to by myself. I published many different print profiles of the following pieces in the photos above just look for the profile posted by me, It will have the correct sizing and what not shown in the pictures. The links are here:

Original set: https://makerworld.com/en/models/1171849-super-mario-magnets#profileId-1180230

Piranha plant: https://makerworld.com/en/models/1165846-piranha-plant-magnet#profileId-1173136 Grass: https://makerworld.com/en/models/971766-super-mario-magnet-grass#profileId-943942 Mushroom: https://makerworld.com/en/models/13158-mushroom-mario-keychain#profileId-1130863 Goomba: https://makerworld.com/en/models/892448-color-goomba#profileId-1130911 Coin: https://makerworld.com/en/models/576456-super-mario-coin#profileId-1130935 Peach: https://makerworld.com/en/models/401313-princess-peach-supermario-keychain#profileId-1130855 Bowser: https://makerworld.com/en/models/58950-multicolor-bowser-magnet#profileId-1130877

I used 6x3 magnets for the piranha plant magnet, but you can always change them in bambu studio. I also used a few 8x2 magnets in some other print profiles, just make sure to compensate for the Z height if you change the dimensions.