Fan art drawing/sketch the Boy Wizard - Harry - Wall art hueforge
2 bonuses tonight - first is Harry Potter.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #11 (0.96mm) swap to Beige At layer #21 (1.76mm) swap to Jade White for the rest.






















