Hello my friends!

The contract work is FINISHED and I can get back to regularly scheduled programming now. Here we have all 5 (for now) cover prints of the books in the ACOTAR series. They're all pretty simple prints - 4 colours except for ACOMAF which uses 5 colours.

Thought I'd toss them here for those of you who want to add to their ACOTAR collection 🙂

Unfortunately due to the way Thangs' uploader works, I had to upload all the files individually and I wish I were able to do it in a more of an organised manner. All the files have been named appropriately so you should be able to discern which .txt file belongs to which 3MF/STL file.

As per usual, the 3MF file will have the settings and layer swaps loaded in already for those of you who use Bambu printers and the AMS system. If you do not have an AMS, you can change the 'filament swap' to a pause, and swap the filament out manually instead! I have also attached the STL for your convenience - and you will have to use the .txt files to code in the layer swaps if you do use the STLs.

All print instructions are in the respective .txt files. These files print at a layer height of 0.08mm, with a first layer height of 0.2mm. With 100% infill.

Enjoy!!!