BLOB PLANTS

These cute plant characters are perfect for those with brown thumbs! There are 5 different house plants: monstera, ivy, snake, succulent, and prickly pear. You can pair your favorite plant with a modern pot or a classic terracotta, careful not to break one! The pots have a lip so you can twist to lock in the plant. Each plant can be printed as parts or in multicolor.

Features

• 5 plants
• 3 twist and lock pots
• same eyes used on all 5 plant types
• print in parts or multicolor
• prints without supports

Plant Types

• monstera
• ivy
• succulent
• snake
• prickly pear

Pot Types

• normal
• broken
• modern

NOTE: The Greenhouse display is not available in this download and is only on Patreon since it is intended for commercial use.

PERSONAL USE ONLY

Purchasing or downloading this file does not give you the right to sell physical prints of this design. Commercial license is available for this design by subscribing to patreon.com/bloblab

COPYRIGHT PROTECTED FILES

All Blob Lab designs are protected under copyright law. Your purchase does not give you the right to sell or distribute the digital files in any way.

FILAMENTS

If you'd like to purchase the same filaments used in this design, please check out the Blob Lab Amazon Storefront affiliate link amazon.com/shop/bloblab3d

PRINT INSTRUCTIONS

• .12mm layer height recommended for high quality, .2mm for greenhouse display
• print without supports
• print all parts on their flat side
• eyes snap into head, use superglue if too loose, scale parts or adjust X-Y compensation if needed
• glue in ivy vines and monstera leaves,
• the monstera has 3 small leaves and two big leaves, the two big leaves fit into the large slots on the top and over its right eye, while the small leaves fit into the other smaller slots.
• print greenhouse parts with brim or mouse ears to avoid warping corners
• add a colorswap for the "Blob Plants" sign for single color printers
• insert glass panes into the greenhouse frame, then glue on the front
• 3MF files are for color information only, print settings may need to be adjusted