Ludo Ice Cream Clicker The Ludo Ice cream clicker comes with two different ice cream styles, Sprinkles and no sprinkles. This is a great model to print in any color, you can mix and match ice cream 'flavors'.For the clickers, you only need to snip plastic standoffs if your clickers have them. Simple Fold over any metal standoffs on the underside of your clicker, there is no need to fully cut them.

Clicker This design will work with most 3 pin plate mounted keyboard switches. We Recommend..

• For Small Quantities Kailh Box White Clickers are the best.
• For Large Quanities: Pawpers, by Pawpular Prints : These also have pre-snipped prongs, making assembly easier!

This model can be used as a keychain. (keychain versions only available in the easy print 3mf) Key chain

Printing This print requires a multi-color printer (unless you want to hand-paint the model). Use the included Easy Print File for the pre-colored model to make printing easier!

Print at 0.2mm layer height. Use adaptive layers to get a smoother top surface.

-Print the cone upside-down, Add supports. -Print the middle later ice cream on its flat part with the clicker geometry pointed up.

• Print the top layer ice cream upright and add supports.

Assembly 1.Press the Clicker into the cone 2.Press the first layer of ice cream onto the clicker 3. Find the correct orientation of the top ice cream (spin it around until it sits flush) 4. Super glue the top layer of ice cream.

Filaments I Used: White: Bambu Ivory white Brown: Bambu Latte Brown Pink: Bambu Sakura Pink Blue: Bambu Sky Blue Green: Bambu Grass Green