If you were hoping for a Pixel 4 Leaf Clover Fidget - you're in luck! 🍀

3D Printing Instructions: PLA basic filament preferred Layer Height 0.2mm Infill 15% Supports needed under the stem of the clover

• I recommend using a glue stick on the print for the larger size (It's a long print - almost 7 hours - which is a lot of 'jarring' of the print. Because of this I just recommend a little glue:)

Basic PLA is the best for this print. Like my other pixel style fidgets, I don’t recommend PLA Silk or PLA Matte filaments for this print. It is very detailed (on the inside) and the tolerances are small. I printed several of these in these three types of filaments and Basic PLA always printed the best and had smoother “movement” when done.

Again, if you have any difficulty printing this I recommend:

• Using a glue stick on the print bed
• Slowing the print down

I have also included a 3mf file with the following print profile: Print Plate #1 (Large Pixel 4 Leaf Clover): one color, supports under the stem Print Plate #2 (Small Pixel 4 Leaf Clover): one color, supports under the stem

Have fun printing and Happy St Patrick’s Day! 🍀 - Erin