Easter Bunny Holding an Egg – Multi-Part 3D Printable STL (No AMS Required!) Looking for the perfect 3D print to bring some Easter magic to life? This adorable Easter Bunny holding an Easter Egg is just what you need! Whether you're crafting a charming gift, a festive decoration, or stocking up for your shop, this multi-part model is designed to print beautifully in separate colors—no AMS system required! Just swap your filaments, print each piece, and assemble for a stunning, multi-colored bunny that looks amazing right off the bed.

Licensing: Want to sell your creations? You’re covered! This STL file comes with a life-time commercial license, so you can print and sell with confidence.

Features:

• NO AMS REQUIRED: No AMS? No problem! Designed to work beautifully on single-color printers without the need for an Automatic Material Switching (AMS) system. All colors print separately as pieces. A fully assembled STL version is also included if you would prefer using an AMS. You can easily paint the parts in slicer.
• Fit Together Pieces: As this was designed for single color printers, all pieces will fit together. However, glue is recommended to hold the model together.
• Perfect for Gifts & Decor: Brighten up Easter baskets, table centerpieces, or your 3D print shop!
• Commercial License Included: Print and sell as many as you’d like!
• BONUS EASTER EGG: We have included our Easter Egg 1 file (pictured in photos). Easter Egg 1 also available for purchase separately.

SAFETY NOTE: This model contains small parts that may present a choking hazard. It is not suitable for young children or pets.

This delightful Easter Bunny is ready to hop onto your print bed and bring smiles all around. Grab your STL file today and get printing!

Assembled Dimensions: Height: Approx 5.94” Width: Approx 3.31” Depth: Approx 3.84"

PLEASE NOTE: Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm Standard settings. Filament used was PLA. Plate used was Bambu Textured PEI Plate.

Recommended Print Settings:

• Supports – YES
• Support Type - TREE SLIM
• Supports on Build Plate Only
• Threshold Angle - 30 degrees
• Brim - YES - recommended for small pieces only or if you have adhesion issues
• Top Z-Distance - .28
• Bottom Z-Distance - .28
• Layer Height – 0.2mm or smaller
• Nozzle Size – 0.4 or smaller
• Seam – Nearest
• Infill – 15%
• Wall Loops - 2

Print Times with settings above:

1. Body – Approx 2hr
2. Belly, Hands, Feet, Muzzle, Tail – 57 min
3. Head – 46 min
4. Nose and Ears – 7 min
5. All Eye Parts – 25 min