.png&w=3840&q=85)
.png&w=256&q=75)
Gamboling Grasshopper - Articulated Fidget Grasshopper - Ludo 3D Printed Flexy Fidget Toy
The Gamboling Grasshopper
gambol noun: skipping or leaping about in play
This Fidget Grasshopper is designed to be printed with no supports. All the joints articulate right off the build plate. Smash the grasshoppers butt with your finger to send him flying!
This Model is also available as a keychain (in the easy print 3mf only) Keychain Version This model is available with a hole cut for keychains. (Provided in the Easy Print 3mf only) Key chain
Printing This print requires a multi-color printer (unless you want to hand-paint the model). Use the included Easy Print File for the pre-colored model to make printing easier!
Print at 0.2mm layer height. Use adaptive layers to get a smoother top surface.
Filaments I Used: Some of these contain affiliate links
Black: Bambu Matte Charcoal Green: Overture 21-olive green Yellow: Overture 19-highlight Yellow Light Brown: Bambu Matte Dark brown
Gamboling Grasshopper - Articulated Fidget Grasshopper - Ludo 3D Printed Flexy Fidget Toy
Ludo Sheltie - Articulated Fidget dog
Jumping jackalope - Articulated Fidget Jackalope
Chatty Cockatoo - Articulated fidget Cockatoo
Ludo Havanese -Articulated Fidget Dog
Labradoodle - Articulated Fidget Dog
Ludo Pug - Articulated fidget dog
Popsicle Clicker
Buck-Tooth Beaver - Articulated fidget beaver
Ludo Boarder Collie - Articulated Fidget Dog
Ludo Springer Spaniel - Articulated Fidget Dog
Grumpy Goose - Articulated Fidget Goose
.png&w=3840&q=75)
Ludo Chihuahua - Articulated fidget Dog
Pecky Pigeon- Articulated Fidget Pigeon
Icky Iguana - Articulated fidget Iguana
Ludo Jack Russel - Articulated Fidget Dog
Squawking Seagull - Articulated Fidget Seagull
Ludo Pomeranian - Articulated Fidget Dog
Husky - Articualted Fidget Dog
Able Alien - Articulated fidget alien
Didn't get one good print, everytime the head just bobbles loose and it becomes spaghetti Any solutions? I tried, brim, lac, supports etc
Hi! You can try increasing your z-hop. Sometimes the nozzle will knock off small parts, like the head. also please be sure that your build plate is thoroughly washed with dish soap and warm water